Home Improvement

Archive for the ‘Furniture’ Category

Furniture that you have the home course of making a variety of materials ranging from teak wood to plastic. The following are tips on caring for teak furniture.
1. Clean the sidelines or corner carving teak furniture or teak furniture by using a small soft brush. At points of dust and mold is often nested. Small brush to wipe the corners of the hard to reach with a rag. Brush with soft brush until clean.
2. Use a pledge to clean the surface of Indonesian furniture. Spray the pledge to the surface of furniture and wooden furniture sidelines. Spray as needed. Do not get excessive. Pledge can be found at furniture stores or market.
3. Surface of garden furniture that has been cleaned with a pledge to be cleaned with a cloth ball. Then allowed to dry. Ball of cloth materials can be bought in stores.
4. Clean your antique furniture on the way at least once a week. For daily cleaning of wood furniture, just broom the surface of your furniture or wooden table with a feather duster evenly.

Wooden furniture found in the home such as tables, chairs and cabinets is the perfect choice to create a warm and comfortable atmosphere for the residents.

In addition, natural shades and nuances of classical when adjusted for the room will give a touch of elegance to the interior of the room. No doubt, you will feel more comfortable to spend time at home.

However, it also takes care of furniture patience. Especially in today’s rainy season, mushrooms and humid air often become a major threat to wooden furniture, dirt and dust accumulate even faster. If this is ignored constant, then sooner or later it’ll display your furniture is damaged and unsightly. To avoid this, get used early to treat and protect your valuable wood furniture.

The simplest way is to clean dust and dirt on the surface of your furniture at least once a week. Use a soft cloth so as not to scratch the surface of the furniture. Affordable for the hard part, especially in the carving, use a small brush to clean it. If you want maximum results, spray once a month or a liquid layer of wax on furniture furniture nurses who have been cleared, then flatten with a cloth.

Undoubtedly your wooden furniture will always look clean and shiny as new.
To maintain the beauty of the color of the wood furniture, try not to put furniture in a place exposed to direct sunlight. Sunlight can make the color gradually faded and damaged furniture into the surface layer.

Attach the base if you want to put objects on the furniture, and do not get used to shift the objects on it. Patron hot and cold drinks also should be used whenever you want to put a drink on the wooden table.

This is intended to avoid the surface layer scratched furniture.
In order furniture durable and not easily broken, put the furniture in a dry place and keep things wet or moist, such as plants that do not directly touch the surface. Pretty easy, right? Good care for your wood furniture.

This chair design idea originally comes from my own house, who happens to have a living room and living room open space with limited space. Because of the variety of activities, then we need a chair that could double, to formal activities (eg when there are guests, discussions, meetings and others) and for leisure activities (when watching TV, read books, visited his nephew, etc.). Having obtained the functional relationship between the chair and sitting activities, the process also continues to design a visual idea.

This chair when an upright position, similar to ergonomics chair or sofa to normal, but when reversed or referred to (vlik name from the term ‘Flick’) This seat will go to the other side (living room) and turned into a relaxed position with low ergonomic sofa / reclined / seats fell to relax watching TV, read books, and more.

A chair for the two activities with the approach ’simple’. Well of course there will be ‘ergonomical compromise’ in the second position, but tried to overcome the form of ‘Curved’ and the thickness of foam sufficient to provide a point of sitting tolerance when used.

In addition, the chair should be sturdy structure but flexible within certain limits that can be used well. Stage of completion details or ‘fine tune’ is still required to enter the production phase.

For the production stage to use simple, modular system for wood materials, due to lack of economical bending system. In addition, alternative materials can be used semi-organic composite or recycled materials (recycled materials). Hopefully together with the Savana Furniture we can realize this chair.

For each type of roof covering (ceramic tile / concrete / metal, zinc, aluminum, onduline, fiberglass or asbestos), size / dimensions, thickness and frame construction horses lightweight steel roof that used different materials adapted to the weight of the roof covering. Heavier roof covering material, the bigger / thicker is also the framework used. And vice versa.

Do not be fooled at low cost, precision is necessary before purchasing. Ask for information size / dimension batten (Batten roof) and C-channel frame will be installed. The bigger / thicker batten and C-channel frame, the greater the weight that can be borne by the framework. The smaller the size / dimension C channel, the minimum order is also the ability to bear the total burden of closing the roof.

Size C channel for Galvanized Zincalume and there are 3 types:

* C71.075

Recommended to the rafters with the kind of metal roof cover, zinc, fiberglass, Onduline, asbestos and other types of roof cover that is lightweight. C71.075 usage with a wide expanse remains secure because the power of the framework / horses proportional to the total burden of closing the roof.

* C81.075

In addition to the framework recommended by the roof cover type as mentioned above with a wide expanse, C81.075 also be applied to types of ceramic tiles cover the medium-span roof (- / + 7 meters).

* C81.095

Recommended to the rafters with the kind of ceramic tile and cover concrete tile roofs with long spans (s / d> 9 meters).

For the calculation and design of steel frame construction to be installed, we use special software lightweight steel roof truss which ensures precision materials and installation of lightweight steel roof truss.

As for tile or roof covering material, so many choices available in the market that have very different qualities. Regarding the choice, they go back to your own based on considerations of taste and the amount of funds available. Simple tips from us: “There is no quality price” .

The couch is the main furniture that serves to sit back. The sofa has a main framework, which is then covered by fill material and fabric cover. With the armrest on both sides, would be more comfortable couch occupied.

General framework of the sofa has a wood or iron. Agency framework coated fillers such as foam or cushion. Then there is the resilience of upholstery fabric with a high enough. The stronger the fabric of the cloth fibers, the longer endurance the sofa fabric.

Framework of the sofa can also be coated with natural materials, like woven rattan, water hyacinth, until the stem of a banana. The coated part is the outside, including the back of the hand and back. Seat and back sections are usually equipped with cushions for the seat again feels soft and comfortable.

Filler material can be arranged density couch. Pengisinya denser, then the holder was increasingly hard couch. Tenderness levels are generally tailored to the sofa and laying function of the sofa. For informal areas such as living room, sofa filling density level is made more tenuous that feels soft and comfortable.

In addition to the cloth has a permanent nature, also has a sofa upholstery or slipcover known. Slipcover is the sheath coating fabric sofa with properties similar to the sofa slipcover. Slipcover is usually chosen from textiles that can be washed. Use of many found in the slipcover or sofa sofabed two or three seats.